17 Apr


Solar Panels Installation is one of the most popular DIY projects nowadays. This is mainly because you can actually save a lot of money, the environment as well as your wallet by doing this. You will not only be able to save money when installing your own solar panels, but you will also save on your electric bills each month. Solar Panels Installation can be done on your own or you can even hire professionals Blue Raven Solar to do it for you. But either way, here are some important things that you need to know and keep in mind when doing your solar panels installation.

First thing that you need to consider in doing your solar panels installation is to choose the right mounting system. There are two types of mounting system that you can choose from: Ready-to-Run or Ready-to-Inslate. Ready-to-Run system comes with solar modules already built into the panels. You just have to mount them where you want them. In the other type of mounting system, you have to install the solar modules on the surface of the roof. The latter kind of mounting system makes sure that the solar modules are well-installed and are secured in place to ensure maximum solar coverage.

Next, you have to decide whether you want to use the panels for residential solar power or for commercial solar power. If you want to use residential solar power, you will need at least 4 large solar cells. These solar cells will absorb the sun energy and convert it into electrical energy. If you want to use commercial solar power, you will need bigger solar cells.

Then you also have to consider the batteries that you are going to use to store the captured energy. Usually the battery is attached on the roof. But if you want to have smaller and more convenient mounting system, you can choose between the mounted panels and the batteries. Battery packs may also be used but the disadvantage of these is that you will need to constantly replace the batteries. On the other hand, you can install solar modules that you can connect directly to the charge controller.

You have to think about how many sun hours per day your house receives. It is important to calculate the amount of energy needed to make up for the electricity consumption during the day. Once you know how much energy your home value increase estimate needs, you can calculate how many sun hours you need to absorb to make up for the electricity consumption. This will help you decide which mounting system is best for your house. Nowadays, the choices are many. In fact, there are more than a hundred types of install solar panels systems available in the market and you can choose one of them depending on the type of solar power you need and the location of your house. 

Installing panels on a flat surface is not recommended. Flat surface tends to absorb more heat and this will reduce the efficiency of the solar system. The best place to install solar panels is on an angled roof. The roof will be able to trap the heat during the day and during the night it will let excess heat escape. Also, flat roofs tend to cost more than sloped roofs.

You can get more info by clicking here -

https://www.britannica.com/technology/solar-panel 

Comments
* The email will not be published on the website.
I BUILT MY SITE FOR FREE USING